Unlock Chip to Make the Device Limitless! Get a Professional MCU Crack Unit Do It

A microcontroller sometimes is referred to as a small computer on a single integrated circuit (IC). It contains a processor core, memory, and programmable input/output peripherals. Microcontrollers are practically used in embedded applications, in contrast to the microprocessors used in PCs or other general-purpose applications. Therefore, when unlocking the chip, it can provide a limitless opportunity to explore. 

Hardware security in microcontrollers, thus, is being constantly improved for MCU crack. You must be thinking why? This is because the tools for MCU crack are becoming more sophisticated. So, better and better security protection is required. 

How Long It Takes to Unlock Chip?

Unlocking Chip generally takes 5-to-15 days. However, a few of the MCU crack chores take longer than usual. It fully depends on the level of complexity of the projects. The tech team first physically reviews each Chip to be unlocked. They will look for both obvious evidence of the damage as well as known common faults in the particular chip, and signs of previous repair attempts. Later they will test the functionality of some suspect parts and look for sings on catastrophic failure that would make the chip unrepairable before attempting to unlock chip.

There’re a lot of approaches used by certified MCU Crack services providers in real-time. The most famous approaches among them are:

Chip Unlock via Software Attacking

The technology typically attacking ICs by using the processor communication interfaces and exploits protocols, cryptographic algorithms, or security holes in these algorithms. A typical example of a software attack was the attack on the early ATMELAT89C family of microcontrollers. The attacker took advantage of the loopholes in the timing design of the erasing operation of the series of microcontrollers; by using a self-designed program, stopped the next step of erasing the program memory data, after erasing the encryption locking bit. The program became non-encrypted and then just read out the on-chip program by programmer.

Unlocking Chip by Electronic Detection Attacks

The technology typically monitors the processor’s analog characteristics of all power and interface connections during normal operation with high temporal resolution and attacks by monitoring its electromagnetic radiation characteristics. Because the microcontroller is an active electronic device, the corresponding power consumption changes as it executes different instructions. This allows the attacker to acquire specific critical information in the microcontroller by analyzing and detecting these changes using special electronic measuring instruments and mathematical statistics. As for the RF, the programmer can directly read the old model of the encryption MCU program is to use this principle.

Read More

PCB Clone: The Best Way to Microcontroller Reverse Engineering

The need for printed circuit board cloning or simply called PCB clone comes about a variety of reasons. The prime reason to do PCB clone is the need to replace an obsolete PCB that is no longer available from the original manufacturer. 

Missing manufacturing files such as Gerber files are often cited as the main reason. Another reason to do PCB clone is the cost. Some PCBs are considered proprietary by the OEM when in fact they are not; they’re just too expensively priced. Such need generally consists of two parts of the job – copying the schematics and making the BOM (Bill of Material). 

People can easily make a PCB assembly with schematics and BOM but not PCB clone. Of course, there is another vital part – microcontroller cloning, since microcontroller cloning is only needed for PCBs with locked controllers, please refer to Shenzhen OROD Technology Co. Ltd for more information.

Create Same PCBs without Files: PCB Copy Service at Best Price

Are you missing the CAD or PCB files for that bare or assembled printed circuit board (PCB)? Do you have the physical electronic circuit board on-hand but don’t have the circuit design files? Don’t have any PCB Gerber drawing files for your PCB production and circuit assembly. Or want to reproduce the PCB board without any blueprint? There’s a solution to everything – PCB copy or PCB cloning!

So, What PCB Copy Exactly Is?

PCB copy service enables you to replicate the same copy of the electronic circuit board that you want for a simple electronic circuit. PCB copy isn’t too difficult. If the right circuit involves an intelligent controller, cloning should be the last resort that you should opt for as a solution for your engineering or business challenge. 

Technology included PCB copy enables the possibility of reversing the PCB module from the physical item to engineering drawings. Physical PCB modules will be translated into PCB Gerber (the production engineering file), PCB BOM List (PCB component list) and PCB Schematic Diagram. With these engineering files, the tech teams can re-produce/clone a PCB module. 

Reversing Steps to PCB Copy:

• ·         Remove all the components and record the placement of every component on the board
• ·         Scan outer layer PCB circuits to software for editing and comparison
• ·         Remove the dielectric layer PCB, and scan the inner layer PCB circuit to the software for editing and comparison
• ·         Remove copper layer scanned, and repeat step 3 until all layers are recorded
• ·         Reverse the images taken to Gerber file (the engineering file for manufacturing)
• ·         Convert the Gerber file obtained to PCB layout design, and add all the components in the drawings according to the placement recorded
• ·         Check the layout drawing to make sure there is not open/brake circuit
• ·         Convert the layout drawing to schematic drawing
• ·         Check the schematic drawing

Read More